Good quality Cnc Laser Tube Cutting Machine - Three-chuck Automatic Feeding Tube Laser Cutting Machine – Guo Hong

Description:

Three-chuck automatic feeding tube laser cutting machine

Innovative three-chuck design, stable clamping & stable cutting

Real zero tailing, super saving tailings, full Automation, Less Labor Costs

Three-chuck automatic feeding tube laser cutting machine developed by Guohong Laser Technology has two pneumatic chucks at the front and rear, and an electric chuck in the middle. The three chucks can be clamped and cut at the same time, with high cutting accuracy; It can realize cutting without tails, save production cost and improve production efficiency. The chuck has a self-adjusting center function, which can realize fast centering and clamping segmented feeding and cutting, and improve cutting accuracy. The three-chuck structure and the double-clamping function of the middle chuck can assist in correcting the deformation of the small pipe itself and improve the cutting accuracy. High-speed automatic cutting, meeting the cutting of special-shaped pipes such as round pipes, square pipes and rectangular pipes.

Innovative three-chuck design, stable clamping & stable cutting

One-key self-centering, fast clamping, rapid cutting

Three-point clamping to correct pipe bending, prevent inertial shaking and ensure cutting accuracy

The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient

The rear chuck brakes quickly to ensure pipe cutting accuracy

Real zero Tailing, super saving tailings

The diameter of round tube: 15mm-220mm

The side length of square tube: 15mm-150mm

High pipe load, the maximum single pipe weight is 300kg

Clamping square tube, round tube, oval tube, flat tube, triangle tube, I-beam, and other materials without pressure

Full Automation, Less Labor Costs

Automatic Feeding
Realize the intelligent material separation, feeding and seamless docking with the fiber laser cutting machine after the whole bundles of tubes are placed in the feeding device, and ensure that only one tube is delivered to the conveying arm each time.

Automatic Unloading
The finished product is automatically dropped to the storage bin, double support-bearing auxiliary support overlong tubes.

Three-Chuck Tube Cutting System, intelligent control

Real-time compensation of pipe center deviation, reducing pipe clamping requirements and higher efficiency;

The pipe has higher perforation accuracy and more accurate cutting.

Based on the bus real-time system and integrated control, the pipe corner-cutting is faster;

The corner following is more stable, and the cutting quality is more reliable.

Plate welding bed design

The bed adopts an open-web integral profile welding structure that has been verified and verified by CAE analysis. High temperature annealing and natural aging are used to eliminate welding stress, prevent deformation, reduce vibration, and ensure cutting accuracy

PARAMETERS

Cut sample

Protuct Features:

1.Automatic feeding, saving material and labor cost and improving efficiency

2.Photo-sensing pipe heads and cutting remains kick-out. Save labor handling procedure.

3.Automatic sensing and cutting the pipe heads and remains

4.Smooth and burr-free cutting

5. Cutting accuracy ± 0.1mm