Three-chuck laser pipe cutting machine
Innovative three-chuck design, stable clamping & stable cutting
Real zero tailing, super saving tailings
Three-chuck laser pipe cutting machine, innovating the double-chuck clamping method, adopts a three-chuck design, which can maintain the front, middle, and rear three-point clamping support of the pipe in real-time and can correct the pipe bending problem. The relative cutting efficiency of some pipes is 5%-10% higher than that of the double chuck pipe cutting machine. The pipe cutting is true ‘zero tailing’, helping customers to achieve fast, high-quality, and low-cost production and processing.
One-key self-centering, fast clamping, rapid cutting
Three-point clamping to correct pipe bending, prevent inertial shaking and ensure cutting accuracy
The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient
The rear chuck brakes quickly to ensure pipe cutting accuracy
The diameter of round tube: 15mm-220mm
The side length of square tube: 15mm-150mm
High pipe load, the maximum single pipe weight is 300kg
Clamping square tube, round tube, oval tube, flat tube, triangle tube, I-beam, and other materials without pressure
Industrial Design-The unique industrial structure design gives .it maximum stability and higher vibration resistance and damping quality.
Spacing Is Compact -The compact spacing of 650mm ensures the agility of the chuck and the stability during high-speed driving.
Groove Welding Process-The high-strength steel plate welding bed “uses groove welding technology to achieve equal-strength welding between steel plates.
Real-time compensation of pipe center deviation, reducing pipe clamping requirements and higher efficiency;
The pipe has higher perforation accuracy and more accurate cutting.
Based on the bus real-time system and integrated control, the pipe corner-cutting is faster;
The corner following is more stable, and the cutting quality is more reliable.
Double-sided support device
It can reduce processing errors, ensure uniform force on the entire metal pipe, and improve cutting accuracy.
The chuck and support device are highly synchronized
Real-time feeding to prevent the reduction of cutting accuracy due to pipe distortion.
|Cutting diameter of round tube||20-200mm|
|Cutting diameter of square tube||20*20mm-150*150mm|
|Max. movement speed||100m/min|
1. Metal tube cutting.
2. Compared to other tube cutting machine, easy to transport.
3. Easy Operation, every machine, we have operation manual, when you get the machine, you can operate the machine quickly.
4. Every machine parts, must be quality assurance.
5. Every machine before delivery, we have tested well.