The fiber laser cutting machine can be applied to cutting a variety of materials. It has always been a blind zone in the cutting of metal materials. It has changed in recent years. In recent years, it has been gradually promoted in the cutting application of copper products. For the cutting of copper products, many people have many problems with the specific operation and parameter adjustment of the fiber laser cutting machine. Cutting is not just about using a machine to cut, but also requires some experience issues. Here is a specific introduction to how the fiber laser cutting machine cuts copper materials.
When cutting metal materials, auxiliary gas needs to be added. When the fiber laser cutting machine is cutting metal copper, the added auxiliary gas reacts with the material under high temperature conditions to increase the cutting speed. For example, if oxygen is used, the combustion-supporting effect can be achieved. For the laser cutting machine, nitrogen is an auxiliary gas to improve the cutting effect. For copper materials below 1mm, the fiber laser cutting machine can be used for processing.
Therefore, when using a fiber laser cutting machine, there is no need to worry about whether it can be cut. At this time, the processing effect should be paid attention to. Therefore, it is best to use nitrogen as the auxiliary gas. When the thickness of the metal copper reaches 2mm, it cannot be processed with nitrogen. At this time, oxygen must be added to oxidize it to achieve cutting.
Through the above introduction, everyone should have a general understanding of how the fiber laser cutting machine should be copper material. In fact, when we are cutting, what we pay attention to is not whether the material can be cut and how much in an hour, but the quality of the cutting. Nowadays, the production of fiber laser cutting machines is very common, but our company pays more attention to the operation quality of the equipment, so buyers must pay attention to the cutting quality of the cutting machine and the reputation of the seller when buying.
Post time: Mar-14-2021