Three-chuck automatic feeding tube laser cutting machine
Innovative three-chuck design, stable clamping & stable cutting
Real zero tailing, super saving tailings, full Automation, Less Labor Costs
Three-chuck automatic feeding tube laser cutting machine developed by Guohong Laser Technology has two pneumatic chucks at the front and rear, and an electric chuck in the middle. The three chucks can be clamped and cut at the same time, with high cutting accuracy; It can realize cutting without tails, save production cost and improve production efficiency. The chuck has a self-adjusting center function, which can realize fast centering and clamping segmented feeding and cutting, and improve cutting accuracy. The three-chuck structure and the double-clamping function of the middle chuck can assist in correcting the deformation of the small pipe itself and improve the cutting accuracy. High-speed automatic cutting, meeting the cutting of special-shaped pipes such as round pipes, square pipes and rectangular pipes.
One-key self-centering, fast clamping, rapid cutting
Three-point clamping to correct pipe bending, prevent inertial shaking and ensure cutting accuracy
The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient
The rear chuck brakes quickly to ensure pipe cutting accuracy
The diameter of round tube: 15mm-220mm
The side length of square tube: 15mm-150mm
High pipe load, the maximum single pipe weight is 300kg
Clamping square tube, round tube, oval tube, flat tube, triangle tube, I-beam, and other materials without pressure
Realize the intelligent material separation, feeding and seamless docking with the fiber laser cutting machine after the whole bundles of tubes are placed in the feeding device, and ensure that only one tube is delivered to the conveying arm each time.
The finished product is automatically dropped to the storage bin, double support-bearing auxiliary support overlong tubes.
Real-time compensation of pipe center deviation, reducing pipe clamping requirements and higher efficiency;
The pipe has higher perforation accuracy and more accurate cutting.
Based on the bus real-time system and integrated control, the pipe corner-cutting is faster;
The corner following is more stable, and the cutting quality is more reliable.
The bed adopts an open-web integral profile welding structure that has been verified and verified by CAE analysis. High temperature annealing and natural aging are used to eliminate welding stress, prevent deformation, reduce vibration, and ensure cutting accuracy
|Cutting diameter of round tube||20-200mm|
|Cutting diameter of square tube||20*20mm-150*150mm|
|Max. movement speed||100m/min|
1.Automatic feeding, saving material and labor cost and improving efficiency
2.Photo-sensing pipe heads and cutting remains kick-out. Save labor handling procedure.
3.Automatic sensing and cutting the pipe heads and remains
4.Smooth and burr-free cutting
5. Cutting accuracy ± 0.1mm